2018澳门正规博彩导航
  松下RAMSA专业音响
  松下无线扩音系统
  松下会议系统
  YAMAHA音箱
  Community音箱
  EAW音箱
  镭特尔Reter音箱
  镭特尔Reter功放
  镭特尔Reter周边
  镭特尔Reter会议
  镭特尔Reter同传
  镭特尔Reter表决
  镭特尔Reter中控
  镭特尔Reter矩阵
  镭特尔Reter楼宇对
  镭特尔Reter配件
  Crestron中控
  LifeSize视频会议
  Roland调音台
  Sennheiser话筒
  Shure话筒
  BBS话筒
  Televic会议系统
  RTI中控
  JBL音箱
  Mipro话筒
  Symetrix
  BOSE音响
  奥尔鑫ARX卡拉OK系
  奥尔鑫ARX专业音响
  奥尔鑫ARX专业会议
  奥尔鑫ARX安防设备
  Motobo专业会议讨论
Crestron中控 首页 >> 产品展示 >> Crestron中控
产品名称: DMPS-100-C
产品编号:
规  格: DMPS-100-C
产品类别: Crestron中控
产品说明

Introduction

>>High-Definition multimedia system switcher, mic mixer, audio DSP, amplifier, and control system

>>DigitalMedia display output featuring DM 8G+ technology

>>Supports HDBaseT Alliance specifications

>>Signal switching for up to 4 sources

>>Handles HDMI®, DVI, DisplayPort Multimode, and SPDIF digital sources

>>Handles RGB, composite, S-Video, component, and stereo audio analog sources

>>Features auto-detecting, auto-switching inputs for all types of video and audio sources

>>Includes built-in 2-channel gated microphone mixing w/DSP

>>Affords versatile audio signal mixing and routing to 3 separate outputs

>>Allows audio-follow-video or breakaway switching for all inputs

>>Enables HDMI audio signal extraction and embedding

>>Provides 2 stereo analog outputs with independent DSP per output

>>Features built-in 40 Watt amplifier, selectable for 8 Ohm stereo or 70/100 Volt mono operation

>>Multi-channel PCM, Dolby®, and DTS® audio signals can be routed to the HDMI and DM 8G+ output

>>DigitalMedia 8G+ connectivity affords a single-wire CAT5e interface for the display device[2]

>>Furnishes Power over DM or HDBaseT for a PoDM/PoH-powered device[3]

>>QuickSwitch HD® technology manages HDCP keys for fast, reliable switching

>>Performs automatic AV signal format management via EDID

>>High-Definition scaler options available

>>Integrated Ethernet switch provides a single-point LAN connection

>>Private Network Mode — requires just two IP addresses for the complete system

>>2-Series control system provides fully-programmable device control

>>Supports Crestron® touch screens, keypads, and wireless remotes

>>Onboard e-Control® Web server

>>Supports XPanel Web-based remote control

>>Supports Crestron Mobile® control apps for iPhone®, iPad® and Android

>>Supports Fusion RV and SNMP remote management

>>Provides easy setup and diagnostics via front panel or software

>>Internal universal power supply for worldwide compatibility

>>3-space 19-inch rack-mountable

 

SPECIFICATIONS

Operating System

Crestron® 2-Series; real-time, preemptive, multi-threaded/multitasking kernel; FAT32 file system with long names

Memory

SDRAM: 32 MB

NVRAM: 256 KB

Flash: 16 MB

Communications

Ethernet: 10/100/1000 Mpbs; auto-switching; auto-negotiating; auto-discovery; full/half duplex; TCP/IP; UDP/IP; CIP; DHCP; Private Network Mode; SSL; SNMP; IPv4; RSTP; SMTP e-mail client; Web

Server; installer setup via Crestron Toolbox; supports all e-Control®, Crestron Mobile®, Fusion RV and RoomView® applications

Cresnet: Cresnet® master mode

DigitalMedia: DM 8G+, HDCP, EDID, CEC, PoDM , HDBaseT compliant

HDMI: HDMI®, HDCP, EDID, CEC

USB: USB service port for computer console

RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking

IR/Serial: 1-way device control via infrared up to 1.2 MHz or serial TTL/ RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver[4]

Ethernet Switch

5-port switch with Private Network Mode; provides (1) rear panel 10/100/1000Base-T Gigabit Ethernet port and (4) internal 10Base-T/100Base-TX Ethernet ports for the control processor, switcher,

audio DSP, and DM port

Video

Switcher: Auto-detecting multi-format digital/analog source inputs, 4x1 switcher, HDMI and DM 8G+ outputs, QuickSwitch HD® technology

Input Signal Types: HDMI (Inputs 1-4), RGB[5] (Inputs 2-4), composite/ S-Video/component (Input 4)

Output Signal Types: HDMI, DM 8G+/HDBaseT

Formats: HDMI w/Deep Color & 3D[6], DVI[1], DisplayPort Multimode[1], HDCP content protection support, HD up to 1080i/1080p, computer up to UXGA/WUXGA, RGBHV, RGBS, RGSB, YPbPr, Y/C,

NTSC, PAL

Input Resolutions, HDMI, Progressive: 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz,

1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz,

1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25),

1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock

Input Resolutions, HDMI, Interlaced: 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to

165MHz pixel clock

Input Resolutions, RGB: 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz

(720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz,

1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz

Input Resolutions, Component: 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60

Input Resolutions, Composite and S-Video: 480i, 576i

Output Resolutions: Matched to inputs

Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels

Audio

Switcher/Mixer: 2-channel gated mic mixer w/DSP, auto-detecting multi-format digital/analog source inputs, 4x3 stereo source switcher, 4x1 multi-channel source switcher, analog and HDMI

outputs, DM 8G+/ HDBaseT output, independent 2-ch mic + source mixer per output, independent stereo DSP per analog output, integrated power amplifier, digital audio pass-through mode

Typical of 2 microphone input channels:

Input Signal Types: Mono analog mic or line level

Analog-To-Digital Conversion: 24-bit 48 kHz

Phantom Power: Enable/Disable per channel

Gain: +12 to +57 dB (mic level), adjustable from 0% to 100%, plus mute

Delay: 0.0 to 85.3 ms

EQ Center Frequencies: 160, 500, 1.2k, 3k Hz

EQ Gain: ±12.0 dB per band

Gating Level (Threshold): -80 to 0 dB

Gating Depth (Attenuation): -80 to 0 dB

Gating Attack: 1 to 250 ms

Gating Decay (Release): 1 to 1000 ms

Compression Level (Threshold): -80 to 0 dB

Compression Ratio: 1:1 to 10:1

Compression Attack: 1 to 250 ms

Compression Release: 1 to 1000 ms

Compression Curve: Hard or soft knee

Limiting Level (Threshold): -80 to 0 dB

Limiting Attack: 1 to 250 ms

Limiting Release: 1 to 1000 ms

Limiting Curve: Hard or soft knee

Typical of 4 source input channels:

Input Signal Types: HDMI or DisplayPort Multimode[1] (Inputs 1-4), analog 2-channel (Inputs 1-4), S/PDIF (Input 4)

Formats, Analog: Stereo 2-Channel

Formats, HDMI & DM: Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, up to 8ch PCM

Formats, SPDIF: 2ch PCM

Analog-To-Digital Conversion: 24-bit 48 kHz

Input Compensation: ±10.0 dB

Typical of 2 analog line outputs w/DSP:

Output Signal Type/Format: Stereo 2-Channel

Digital-To-Analog Conversion: 24-bit 48 kHz

Volume: -80 to +20 dB, adjustable from 0% to 100%, plus mute

Bass: ±12.0 dB

Treble: ±12.0 dB

Mic Mix Gain (x2): -80.0 to 0.0 dB, plus mute

Mic Balance (x2): 0dB to -80dB, either channel from center

Source Mix Gain: -80.0 to 0.0 dB, separately adjustable for Left and Right, plus mute

Mixer Presets: 1 thru 5

Equalization: 10-band graphic + 2-band parametric

GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz

GEQ Gain: ±12.0 dB per band

GEQ Presets: 1 thru 10

PEQ Center Frequencies: 5 to 24000 Hz per band

PEQ Gain: -36.0 to +24.0 dB per band

PEQ Bandwidth: 0.02 to 3.50 octaves per band

PEQ Types: Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf, Notch

Delay: 0.0 to 85.3 ms

Frequency Response: 20Hz to 20kHz ±0.5 dB (digital source);

20Hz to 20kHz ±0.5 dB (analog line source);

20Hz to 20kHz ±0.7 dB (microphone source)

S/N Ratio: >108 dB (digital source), 1 kHz, A-weighted;

>103 dB (analog line source), 1 kHz, A-weighted

THD+N: <0.002% (digital source), 20 Hz to 20 kHz;

<0.005% (analog line source), 20 Hz to 20 kHz;

<0.05% (microphone source), 20 Hz to 20 kHz

Stereo Separation: >108 dB (digital source);

>103 dB (analog source)

Channel Separation: >103 dB

HDMI/DM output:

Output Signal Types: HDMI, DM 8G+/HDBaseT

Formats: Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, up to 8ch PCM

Volume: -80 to +20 dB, adjustable from 0% to 100%, plus mute[7]

Mic Mix Gain (x2): -80.0 to 0.0 dB, plus mute[7]

Mic Balance (x2): 0dB to -80dB, either channel from center[7]

Source Mix Gain: -80.0 to 0.0 dB, separately adjustable for Left and Right, plus mute[7]

Frequency Response: 20Hz to 20kHz ±0.5 dB (digital source);

20Hz to 20kHz ±0.5 dB (analog line source);

20Hz to 20kHz ±0.7 dB (microphone source)

S/N Ratio: >108 dB (digital source), 1kHz, A-weighted;

>103 dB (analog line source), 1kHz, A-weighted

 

THD+N: <0.002% (digital source), 20 Hz to 20 kHz;

<0.005% (analog line source), 20 Hz to 20 kHz;

<0.05% (microphone source), 20 Hz to 20 kHz

Stereo Separation: >108 dB (digital source);

>103 dB (analog source)

Channel Separation: >108 dB (digital source);

>103 dB (analog source)

Stereo Amplified Output (same signal as Program output):

Output Power, 4/8 Ω: 20 Watts RMS per channel at 8 Ohms, 4 Ohms tolerant

Output Power, 70/100V: 40 Watts RMS

Frequency Response: 20 Hz to 20 kHz ±1 dB @ 20 Watts into 8 Ohms;

100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts

S/N Ratio: 98 dB @ 20 Watts into 8 Ohms, 1 kHz, A-weighted;

96 dB @ 20 Watts in 4 Ohms, 1 kHz, A-weighted

THD+N: <0.1% (1 kHz), <0.7% (20 Hz to 20 kHz), @ 20 Watts into 4 or 8 Ohms

Stereo Separation: >65 dB @ 20 Watts, 1 kHz

 

Connectors – Audio/Video Inputs

HDMI INPUT 1 – 4: (4) 19-pin Type A HDMI female, digital video/ audio inputs;

Signal Types: HDMI, DVI, or DisplayPort Multimode[1,6]

RGB INPUT 2 – 4: (3) DB15HD female, analog RGB/video inputs;

Signal Types: RGBHV, component, S-Video, or composite[5];

Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;

Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;

Input Impedance: 75 Ohms nominal;

Sync Detection: RGBHV, RGBS, RGsB, YPbPr;

Sync Input Level: 3 to 5 Vp-p;

Sync Input Impedance: 2.2k Ohms;

Note: RGB Inputs 2-4 and HDMI Inputs 2-4 are mutually exclusive; HDMI overrides RGB when using the auto-switching feature

Y, PB/Y, PR/C/COMP INPUT 4: (3) BNC female comprising (1) auto-sensing multi-format analog video input;

Signal Types: Component, S-Video, or composite;

Formats: YPbPr, Y/C, NTSC or PAL;

Input Level: 1 Vp-p nominal;

Input Impedance: 75 Ohms nominal;

Note: Video Input 4, RGB Input 4, and HDMI Input 4 are mutually exclusive; HDMI and RGB override Video when using the auto-switching feature

SPDIF INPUT 4: (1) RCA female, S/PDIF coaxial digital audio input;

Input Impedance: 75 Ohms;

Note: SPDIF Input 4 and HDMI Input 4 are mutually exclusive; HDMI over­rides SPDIF when using the auto-switching feature

AUD IN 1 – 4: (4) 5-pin 3.5mm detachable terminal blocks;

Balanced/unbalanced stereo line-level analog audio inputs;

Input Impedance: 24k Ohms balanced/unbalanced;

Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;

Note: Analog Audio Inputs 1-4, SPDIF Input 4, and HDMI Inputs 1-4 are mutually exclusive; HDMI and SPDIF override Analog Audio when using the auto-switching feature

MC1/LN1 – MC2/LN2: (2) 5-pin 3.5mm detachable terminal blocks;

Comprises (2) balanced microphone/line audio inputs;

Balanced Mic Input Level: -57 to -12 dBV, 240 mVrms maximum;

Balanced Line Input Level: -28 to +11 dBV, 3.7 Vrms maximum;

Unbalanced Line Input Level: -34 to +5 dBV, 1.85 Vrms maximum;

Mic Input Impedance: 3.9k Ohms, accepts 60 to 600 Ohm source;

Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced;

Phantom Power: 48 Volts DC, software enabled/disabled per channel

Connectors – Audio/Video Outputs

SPEAKER OUTPUT 4Ω/8Ω L – R: (2) 2-pin 7.62mm 15A detachable terminal blocks;

4-8 Ohm stereo speaker-level audio output;

Wire Size: Terminals accept up to 14 AWG;

Output Power: 20W RMS per channel stereo at 8 Ohms, 4 Ohms tolerant

SPEAKER OUTPUT 70/100V: (1) 2-pin 7.62mm 15A detachable terminal block;

Transformer-isolated 70 or 100 Volt mono speaker-level audio output;

Wire Size: Terminals accept up to 14 AWG;

Output Power: 40W RMS mono at 70 or 100 Volts;

Note: 4Ω/8Ω and 70/100V outputs are mutually exclusive

PROG OUT: (1) 5-pin 3.5mm detachable terminal block;

Balanced/unbalanced stereo line-level audio output;

Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;

Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

AUX OUT 1: (1) 5-pin 3.5mm detachable terminal blocks;

Balanced/unbalanced stereo line-level audio outputs;

Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;

Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

HDMI OUTPUT 1: (1) 19-pin Type A HDMI female, digital video/ audio output;

Signal Types: HDMI, DVI[1];

Note: HDMI and DM Outputs function in parallel

DM OUTPUT 1: (1) 8-pin RJ45 female, shielded;

DM 8G+ output, HDBaseT compliant;

PoDM and PoH PSE (Power Sourcing Equipment) port[3];

Connects to DM 8G+ input of a DM receiver/room controller or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[2];

Note: HDMI and DM Outputs function in parallel

Connectors - Control & Power

IR/SERIAL OUT 1 – 4: (4) 2-pin 3.5mm detachable terminal blocks;

IR/Serial output ports;

IR output up to 1.2 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

IR IN: (1) 3-pin 3.5mm detachable terminal block

For connection of the CNXRMIRD IR Receiver[4];

Allows control from IR wireless remotes using RC-5 command set

INPUT 1 – 4: (1) 5-pin 3.5mm detachable terminal block;

Comprises (4) programmable digital inputs;

Input Voltage Range: 0 to 24 Volts DC, referenced to GND;

Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band;

Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts;

Pull-up Resistor: 2.2k Ohms per input

RELAY 1 – 4: (1) 8-pin 3.5mm detachable terminal block;

Comprises (4) normally open, isolated relays;

Rated 1 Amp, 30 Volts AC/DC;

MOV arc suppression across contacts

COM A – B: (2) DB9 male, bidirectional RS-232 ports;

Up to 115.2k baud, hardware and software handshaking support

NET: (4) 4-pin 3.5mm detachable terminal blocks;

Cresnet Master ports, paralleled;

Available Cresnet Power: 30 Watts

SERVICE: (1) USB Type B female, for factory use only

PoDM 48VDC IN: (1) 4-pin snap & lock power jack;

48 Volt DC power input for PoDM power pack[3];

Enables PoDM and PoH power sourcing

100-240V~4.0A 50/60Hz: (1) IEC C14 male chassis plug, main power input;

Mates with removable power cord, included

G: (1) 6-32 screw, chassis ground lug

LAN: (1) 8-wire RJ45 female, 10/100/1000Base-T Ethernet port

COMPUTER (front): (1) USB Type B female;

USB computer console port (cable included)

LCD Display

Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line; Displays input/outputs by name, volume levels, setup menus, signal routing, device info, and other system

information

Controls & Indicators

NET: (1) yellow LED, indicates Cresnet bus activity

LAN: (1) yellow LED, indicates Ethernet activity

HW-R: (1) recessed miniature pushbutton for hardware reset, reboots the control system

SW-R: (1) recessed miniature pushbutton for software reset, restarts the SIMPL program

POWER: (1) pushbutton and green LED, programmable for system power control

SOFTKEYS: (4) pushbuttons for activation of LCD driven functions and passcode entry

MENU: (1) pushbutton, steps menu back one level

, ‚: (2) pushbuttons, scroll up or down through menu and adjust menu parameters

ENTER: (1) pushbutton, executes highlighted menu or value

VOLUME: (1) continuous turn rotary encoder, adjusts menu parameters, defaults to Program audio volume

MUTE: (1) pushbutton and red LED, mutes the Program audio output

ROUTE: (1) pushbutton and red LED, selects ROUTE mode to allow routing changes

VIEW: (1) pushbutton and red LED, selects VIEW mode to view current routing

INFO: (1) pushbutton and red LED, selects INFO mode to view AV and device info

INPUT 1 – 4: (4) pushbuttons and red LEDs, select input to be routed

OUTPUT 1, PROG, AUX 1: (3) pushbuttons and red LEDs, select output destination(s)

SPEAKER OUTPUT: (1) 3-position slide switch, selects the amplifier output configuration

DM OUTPUT 1 (rear): (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence

DM OUTPUT 1 PoDM (rear): (1) green LED, indicates downstream device is drawing power over DM

LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and activity, green LED (right) indicates Ethernet link status

 

MODELS & ACCESSORIES

Available Models

DMPS-100-C: DigitalMedia Presentation System 100

Available Accessories

PW-4818DU: 48V Power Pack for PoDM

HD-SCALER: High-Definition Video Scaler

DM-RMC-SCALER-C: DigitalMedia 8G+ Receiver & Room Controller w/Scaler

DM-RMC-100-C: DigitalMedia 8G+ Receiver & Room Controller 100

DM-RMC-200-C: DigitalMedia 8G+ Receiver & Room Controller 200

AMP-2210S: 2x210W Commercial Power Amplifier, 4/8Ω

AMP-3210S: 3x210W Commercial Power Amplifier, 4/8Ω

AMP-2210T: 2x210W Commercial Power Amplifier, 4/8Ω or 70/100V

AMP-3210T: 3x210W Commercial Power Amplifier, 4/8Ω or 70/100V

AMP-2210HT: 2x210W Commercial Power Amplifier, 4/8Ω or High-Power 70V

CNSP-XX: Custom Serial Interface Cable

IRP2: IR Emitter Probe w/Terminal Block Connector

CNXRMIRD: IR Receiver

DM-CBL-8G-NP: DigitalMedia 8G Cable, non-plenum

DM-CBL-8G-P: DigitalMedia 8G Cable, plenum

DM-8G-CONN-100: DigitalMedia 8G Cable Connector, 100-Pack

DM-8G-CRIMP: Crimping Tool for DM-8G-CONN

CRESNET-NP: Cresnet® Control Cable, non-plenum

CRESNET-P: Cresnet® Control Cable, plenum

CRESNET-HP-NP: Cresnet® “High-Power” Control Cable, non-plenum

CRESNET-HP-NP-TL-SP1000: Cresnet® “High-Power” Control Cable, non-plenum, teal, 1000 ft spool

CBL Series: Crestron® Certified Interface Cables

MP-WP Series: Media Presentation Wall Plates

MPI-WP Series: Media Presentation Wall Plates - International Version

 

版权所有 2018澳门正规博彩导航   地址:南京市建邺区西城路300号君泰国际A幢601-604室   苏ICP备06024480号 服务热线:400-990-2688